OC2 Toddler Standing Tower - Instructions

First things first

Check if you have all the parts.

In case something's missing write to us at care@ocodile.com.

We'll promptly solve this for you.

Don't use power tools, just the included Allen Wrench.

Second things second

  • 1. Take the right side (RS) and attach all the pine boards and bar (A, B and C), one by one, using J screws.

  • 2. Take the left side (LS) and attach it to the other side of A,B and C using J screws. Don’t fully tighten the screws.

  • 3. Slide in D and E and secure them with J screws. D slides in at the back, while E slides in at the front.
    4. Now you can fully tighten all the screws.
    5. The safety bars (F) can be inserted at the end as there are grooves on either side of RS and LS. Use either K or L screws to keep these in place.

  • 6. Peel off the G strips and stick them on D and E.
    7. Stick H on the feet of the standing tower so it won't scratch your floor.

    * Before sticking the "H" pads, make sure you attach the support feet using 2 J screws on each side. You will then put an "H" pad on each of these feet as well.

Last but not least

You can start using the standing tower if the child stands confidently enough on their feet and can walk steadily. This usually means 18+ months, but it varies from child to child.  

Place the toddler tower on a level surface.

Adjust the platform (part E) to the height of your child. Choose the position for which the child's hips are below the top A board.  


You're ready for a new chapter in your parenting adventure.

Parents/ Grandparents/ Aunts/ Uncles/ Adult Siblings/ Loving caregivers supervision needed at all times.