OC6 Instructions

First things first

Check if you have all the parts.

In case something's missing write to us at care@ocodile.com.

We'll promptly solve this for you.

Don't use power tools, just the included Allen Wrench.

Second things second

  • 1. Take the right side (RS) and attach all the pine boards and bar (A, B and C), one by one, using J screws.

  • 2. Take the left side (LS) and attach it to the other side of A,B and C using J screws. Don’t fully tighten the screws.

  • 3. Attach the support feet (S) using 2 J screws for each.
    4. Slide in the step (D) at the front and secure it with J screws.
    5. Slide in the platform (E) from the back. The grooves allow the platform to stay in place without the need for screws.
    6. Fully tighten all screws starting from bottom to top.

  • 7. Peel off the clear strips (G) and stick them on the step (D) and platform (E).
    8. Stick the black pads (H) on all feet to prevent floor scratches.

    * Using the door (F) is optional but is highly recommended for younger little ones. It slides easily in and out.

Last but not least

You can start using the standing tower if the child stands confidently enough on their feet and can walk steadily. This usually means 18+ months, but it varies from child to child.  

Place the toddler tower on a level surface.

Adjust the platform (part E) to the height of your child. Choose the position for which the child's hips are below the top A board.  


You're ready for a new chapter in your parenting adventure.

Parents/ Grandparents/ Aunts/ Uncles/ Adult Siblings/ Loving caregivers supervision needed at all times.