First things first
First things first
Check if you have all the parts.
In case something's missing write to us at care@ocodile.com.
We'll promptly solve this for you.
Don't use power tools, just the included Allen Wrench.
Second things second
-
1.Take RS and attach all the A, B, and C parts one by one using J screws.
-
2. Take LS and attach it to the other side of A, B, and C using J screws. Do not fully tighten the screws yet.
3. Attach the S support feet to the bottom of RS and LS using 2 x J screws for each foot.
-
4. Slide in D and E and secure them with J screws. D slides in at the back, while E slides in at the front. Fully tighten all the screws from bottom to top.
5. Insert the F safety bars into the grooves on either side of RS and LS. Use K screws to secure them in place.
-
6. Peel off the G strips and stick them onto D and E.
7. Stick the H pads onto the feet and legs of the standing tower to prevent scratching the floor.
Last but not least
Last but not least
You can start using the standing tower if the child stands confidently enough on their feet and can walk steadily. This usually means 18+ months, but it varies from child to child.
Place the toddler tower on a level surface.
Adjust the platform (part E) to the height of your child. Choose the position for which the child's hips are below the top A board.
You're ready for a new chapter in your parenting adventure.
Parents/ Grandparents/ Aunts/ Uncles/ Adult Siblings/ Loving caregivers supervision needed at all times.