Mounting the playard is easy if you carefully follow the instructions. It should take around 30 minutes if you have a set of extra hands. You have here a video and below the written instructions with images. If you are not sure about something, write to us at care@ocodile.com.
PARTS LIST
A Connector (Corner Connector)
B Connector (T -Shaped Connector)
THINGS TO KNOW BEFORE YOU MOUNT THE PLAYPEN
Pay attention to these 4 things:
1. All tubes need to be inserted into the playpen fabric first, and then connected to the A and B connectors.
2. The tubes without protective foam on them are used on the bottom.
See the skeleton of the playpen.
3. Both C and D tubes have A and B sides.
The A side comes in the corner connector
(connector A), while the B side comes
in the T-shaped connector (connector B).
4. Make sure you use the A and B connectors properly. 2 ways of the connectors (the ones with push caps) are for the C and D push button tubes, while the other way is for the E (59 cm) tubes.
SETTING UP
Assembling this playpen is easy and the little one can start playing in it in 30 minutes if you follow the instructions laid out here or watch the instructional video above
a) Lay the Playpen Fabric on a flat, level surface.
b) Slide the bottom C and D tubes in the fabric: Make sure the A sides of the tubes are orientated toward the corners, while the B sides are toward the middle.
a) Insert the bottom tubes one by one into the 4 corner connectors that have suction cups and the 4 T-shaped connectors.
b) Slide the E tubes vertically in the
fabric and insert them into all
8 bottom connectors.
e) Slide the upper tubes into the
fabric. The Upper and lower
part should be symmetrical:
2 C tubes along the length,
2 D tubes along the width.
Connect the tubes one by one
to the T-Shaped and corner
connectors.
f) Cover the upper connectors
with the fabric using the velcro strips.
Extras and Toys
g) Place the playmat inside the playpen. The mat is double-sided, so choose whichever side better matches your setting.
h) Hang the pull-up rings on the sides of the playpen.
i) Place the balls inside the playpen.
WARNINGS
Mounting
The product must be fully erected prior to use.
All tubes should be inserted first in the fabric and then connected to the connectors.
The child can become entrapped and die when improvised netting or covers are placed on top of the product.
Never add such items to confine the child in the product.
Strings can cause strangulation! Never place items with a string around a child's neck such as hood strings or pacifier cords.
Never suspend strings over product or attach strings to toys.
Never place the product near a window where cords from blinds or drapes can strangle the child.
Use
Discontinue use of the product when the child is able to climb out or reaches
the height of 35 in. (89 cm).
When the child is able to pull to a standing position, remove bumper pads,
large toys, and other objects that could serve as steps for climbing out.
Always provide the supervision necessary for the continued safety of your child.
Never leave the child unattended.
The play yard is designed exclusively for play and not for sleep.
Never use this product if there are any loose or missing fasteners, loose join broken parts, or torn mesh/fabric.
Check before assembly and periodically during use.
Contact us at care@ocodile.com for replacement parts. Never substitute parts.
PLAYMAT
Never use plastic shipping bags or other plastic film as mattress covers
not sold and intended for that purpose. They can cause suffocation.
Never use a water mattress with this product.
CLEANING
The playpen fabric is machine washable, but make sure to use a gentle program.
Choosing a selection results in a full page refresh.